Homepage CPR Store art team updates photos preorder guides faq contact


REPRODUCTION PLAYFIELD

Artwork by JIM SMITH, CPR Art Team

Original Playfield Donor for Scan provided by PHIL OUWINGA
 

After overwhelming demand, the choice was made to run the Firepower playfields as the PROTOTYPE VERSION.
This was the way Williams originally designed (and intended) the playfield, but made changes for reliability and cost-savings reasons.
Firepower originally had two drop-target banks in front of the pop bumpers, as well as Starburst-style inserts.

You will notice that the target banks in front of the pops have been cut for double-duty - they can be used with standard spot-targets, or
you can perform the drop-target modification without having to cut your playfield up.  Starburst inserts are far superior to the old
flat-bottomed inserts, as they are structurally stronger across their face (due to the starburst ribs).  Firepower historically suffered very
badly from cupped inserts, where the centers of most inserts eventually went concave from the heat of the bulbs.

DROP TARGET RETROFIT INSTRUCTIONS LINK AT BOTTOM OF THIS PAGE




Click to Enlarge




































































BACKLIT PHOTOS
























AVAILABLE FOR ORDER IN THE STORE SECTION

 

Complete retrofit guide hosted by pinball.flippers.info
Developed from documentation of Williams programmer Ted Estes




END OF PHOTO GALLERY