Rollergames Custom Backglass (Mirrored)

$269.00 USD

ROLLERGAMES

Genuine tempered glass (not a translite).   Our Art Director added tasteful mirroring to the original iconic layout, creating a mirrored version of this glass that embodies “what could have been” if Williams hadn’t stopped mirroring glasses for cost-cutting reasons. See gallery pic for diagram of where we added the mirror bits.  Silkscreen mirrored, and perfect digital print.  Polished corners and edges, ready for new 1/8″ backglass trim and lift bar.

SKU: GLAS-RGAMES Category:

REPRODUCTION BACKGLASS CARE and RECOMMENDATIONS

  • Never “triple thick” or apply any additional coatings to the backside of the glass.
  • Alcohol, acetone, and most ‘rattle-can’ liquids must NEVER contact with the ink.
  • If laying a glass down on its backside, always put down a towel or fabric to lay on.
  • The glass stock is tempered – so avoid significant hot-cold temperature shifts.
  • Be cautious of any impacts to the edges, such as setting the glass down on a concrete floor.
  • Never allow ‘sitting’ moisture on the backside.  After 5-7 minutes there is a risk of ink degradation.
  • Do not spray cleaner directly onto the backside as prolonged contact with liquids may damage your glass.
  • If you must clean the backside (bulb dirt, etc.) wipe with a pre-dampened cloth (water or Windex).
  • After wiping, make sure the liquid is dried off (wipe all the way to dry).  Do not allow any moisture to sit.
  • Glass cleaner sprayed directly on the fronts is fine.
  • Don’t let cleaner sit between the channels and your glass.