IMG_7197
IMG_7200
IMG_7201
IMG_7196
IMG_7198
IMG_7199

SKILL ROLL

$239.00 USD

Brand new genuine-glass reproduction for the rare Bally Skill Roll !  Not a decal. Produced on a heavy 4mm tempered glass panel.  Polished corners and edges, ready for easy drop-in replacement.  Gorgeous color-matched reproduction, finally get rid of that old chipped, flaking, or shedding original glass.  This has the original style silver colors. We thought initially the silver layer was mirrored but under close examination of my own glass it became obvious that it was not, so we made it the way they originally did way back in 1956.

 

 

SKU: GLAS-SKILLROLL Categories: ,

REPRODUCTION BACKGLASS CARE and RECOMMENDATIONS

  • Never “triple thick” or apply any additional coatings to the backside of the glass.
  • Alcohol, acetone, and most ‘rattle-can’ liquids must NEVER contact with the ink.
  • If laying a glass down on its backside, always put down a towel or fabric to lay on.
  • The glass stock is tempered – so avoid significant hot-cold temperature shifts.
  • Be cautious of any impacts to the edges, such as setting the glass down on a concrete floor.
  • Never allow ‘sitting’ moisture on the backside.  After 5-7 minutes there is a risk of ink degradation.
  • Do not spray cleaner directly onto the backside as prolonged contact with liquids may damage your glass.
  • If you must clean the backside (bulb dirt, etc.) wipe with a pre-dampened cloth (water or Windex).
  • After wiping, make sure the liquid is dried off (wipe all the way to dry).  Do not allow any moisture to sit.
  • Glass cleaner sprayed directly on the fronts is fine.
  • Don’t let cleaner sit between the channels and your glass.