Lost World Backglass
$269.00 USD
Reproduction backglass produced on genuine tempered glass. Polished corners and edges.
Exempt from our liftbar & trim kit availability, due to being pre-1980 3/16″ (or 5mm) thickness – too thick to fit our CPR custom trim
Gorgeous replacement, finally get rid of that old chipped, crackled, or shedding original backglass.
|
||||||
| Manufacturer: | Bally Manufacturing Corporation (1931-1983) [Trade Name: Bally] | |||||
| Project Date: | February 10, 1977 | |||||
| Date Of Manufacture: | August, 1978 | |||||
| Model Number: | 1119-E | |||||
| MPU: | Bally MPU AS-2518-35 | |||||
| Type: | Solid State Electronic (SS) | |||||
| Production: | 10,330 units (confirmed) | |||||
| Serial Number Database: | View at The Internet Pinball Serial Number Database (IPSND.net) (External site) | |||||
| Theme: | Fantasy | |||||
| Notable Features: | Flippers (2), Pop bumpers (3), Kick-out holes (2), Rollunder spinner (1), Messenger ball (1).
First machine to use the second-generation AS-2518-35 hardware. First machine to use electronic sounds, replacing chimes. First machine to use a photographic backglass. |
|||||
| Design by: | Gary Gayton | |||||
| Art by: | Paul Faris | |||||
| Notes: | At a Chicago Expo, artist Paul Farris stated humorously that the backglass figures were based on himself and his wife. | |||||
Care Instructions
REPRODUCTION BACKGLASS CARE and RECOMMENDATIONS
- Never “triple thick” or apply any additional coatings to the backside of the glass.
- Alcohol, acetone, and most ‘rattle-can’ liquids must NEVER contact with the ink.
- If laying a glass down on its backside, always put down a towel or fabric to lay on.
- The glass stock is tempered – so avoid significant hot-cold temperature shifts.
- Be cautious of any impacts to the edges, such as setting the glass down on a concrete floor.
- Never allow ‘sitting’ moisture on the backside. After 5-7 minutes there is a risk of ink degradation.
- Do not spray cleaner directly onto the backside as prolonged contact with liquids may damage your glass.
- If you must clean the backside (bulb dirt, etc.) wipe with a pre-dampened cloth (water or Windex).
- After wiping, make sure the liquid is dried off (wipe all the way to dry). Do not allow any moisture to sit.
- Glass cleaner sprayed directly on the fronts is fine.
- Don’t let cleaner sit between the channels and your glass.
US Tarriff Info
You may also like…
Toppers
$99.00 USD
Plastics Upgrade Kits
$89.00 USD
Plastics
$159.00 USD
Playfields
$849.00 USD