Miss World Backglass (Wall Art)

$199.00 USD

*** NOTE: THIS IS NOT A MACHINE-USABLE BACKGLASS ***

Genuine tempered glass (not a translite).  This is a gameroom wall-hanger product, or even better if used backlit in a lightbox.  It’s a real backglass, but not intended as a machine-usable backglass.  A rendition of the ultra-rare GEIGER Miss World backglass (only ~4 were ever made).  Master artwork from the only existing scan, provided by Geiger’s last man standing, in Germany.  The rest of the layout and layering was rebuilt in-house.

For those who don’t mind a little “adult” ambience in their “man cave” – this is for you.  Mirroring has been replaced with faux texturing that maintains the mirror feel (see photo).  To assure that these will not be used in conversion projects, the design of the glass has been ‘hobbled’ in the following ways ->  score windows have permanent photographic score displays printed.  They look real.  They cannot be removed.  The rear lightblock layer of the glass has all of the text features removed (Ball in Play, Tilt, High Score to Date, etc).

SKU: GLAS-MISSWORLD Categories: ,

Care Instructions

REPRODUCTION BACKGLASS CARE and RECOMMENDATIONS

  • Never “triple thick” or apply any additional coatings to the backside of the glass.
  • Alcohol, acetone, and most ‘rattle-can’ liquids must NEVER contact with the ink.
  • If laying a glass down on its backside, always put down a towel or fabric to lay on.
  • The glass stock is tempered – so avoid significant hot-cold temperature shifts.
  • Be cautious of any impacts to the edges, such as setting the glass down on a concrete floor.
  • Never allow ‘sitting’ moisture on the backside.  After 5-7 minutes there is a risk of ink degradation.
  • Do not spray cleaner directly onto the backside as prolonged contact with liquids may damage your glass.
  • If you must clean the backside (bulb dirt, etc.) wipe with a pre-dampened cloth (water or Windex).
  • After wiping, make sure the liquid is dried off (wipe all the way to dry).  Do not allow any moisture to sit.
  • Only spray glass cleaner on a clean cloth to wipe down the front of the glass! Never spray directly on the glass to avoid liquid wicking around the channels to the artwork.

US Tarriff Info

*Important info when purchasing Lift Bar Kits*

The liftbars are all made to the most common backglass width of 28.5 inches, just like they have been sold for decades in the hobby. IF you have a backglass that is of lesser width, the end-user is expected to cut/chop to the lesser length needed.

PLEASE NOTE: These are for 1/8″ -or- 4mm (metric) backglasses. Sorry, these will not fit on “thick style” 3/16″ or 5mm backglasses, either original or CPR repro (roughly any glass for a game 1979 or prior). We do not offer 3/16″ style liftbars at this time.

Copyright 2026 © Classic Playfields Reproductions 'CPR - Breathing New Life into Old Pins'