Star Trek Next Generation Custom Mirrored Backglass

Name: Star Trek Next Generation Custom Mirrored Backglass
SKU: GLAS-STTNG
Availability: InStock

$289.00 USD – $315.00 USD

NEW 2021 DIGITAL VERSION

Genuine silkscreened mirrored + flawless multi-layer digital print from new master layout. Please see photo gallery for identification of custom mirrored areas. This translite-to-backglass conversion allows STTNG owners to mod their machine to a classic mirrored backglass look, as if STTNG had a backglass from the beginning.

Trim Options

Clear

SKU: GLAS-STTNG Category: Backglasses

Star Trek: The Next Generation

Manufacturer:

Williams Electronics Games, Incorporated, a subsidiary of WMS Ind.,
Incorporated (1985-1999) [Trade Name: Williams]

Date Of Manufacture:

November, 1993

Model Number:

50023

Common Abbreviations:

STTNG, ST:TNG, STNG

MPU:

Williams WPC (DCS)

Type:

Solid State Electronic (SS)

Production:

11,728 units (confirmed)

Theme:

Licensed Theme – Outer Space

Specialty:

Widebody

Notable Features:

Flippers (3), Pop bumpers (3), Ramps (3), 3-bank standup targets (2), Spinning target (1), Cellar holes (4, with one blocked by a drop target), Left outlane kickback. Catapult used for autoplunger (ball is launched through a spiral habitrail). 2-, 3-, 4-, or 6-ball multiball. Unlimited buy-in balls per player (operator option).

There are three cellar holes in the upper half of the playfield. They lead to three VUKs below the playfield that will kick the ball up to the left habitrail or to either of the two cannons on top of the slingshots. To reduce the time it would take for a ball to fall into a cellar hole, roll down under the playfield to a VUK, and resurface back into play, a patented below-the-playfield multiple ball delivery system was developed. In this system, other balls are already positioned below the playfield, one in each of the three VUKs. As soon as the playfield ball falls into a cellar hole, the corresponding VUK kicks its ball into play. The playfield ball then rolls down to remain in the newly-vacated VUK. Game play is continuous, and time has been saved.

Patent #5,350,174 [BELOW THE PLAYFIELD BALL DELIVERY SYSTEM FOR A PINBALL GAME] filed October 28, 1993. Granted September 27, 1994 to Ritchie et al. Assignee is Williams Electronic Games, Inc.

Toys:

Two ball-firing cannons are on top of the slingshot bumpers. The Borg ship fires the locked ball at the flippers at the start of multiball.

Concept by:

Steve Ritchie

Design by:

Steve Ritchie, Dwight Sullivan, Greg Freres

Art by:

Greg Freres

Dots/Animation by:

Scott Slomiany, Eugene Geer

Mechanics by:

Carl Biagi

Music by:

Dan Forden

Sound by:

Dan Forden

Software by:

Dwight Sullivan, Matt Coriale

Notes:

This game was part of Williams/Midway’s “SuperPin” line of widebody games.

Artist Greg Freres said at Chicago Expo 2017 that examples of this game may have plastics with the word “shields” misspelled as “sheilds”. We do not know where on the game this mistake would be found and have no picture examples of it.

An earlier example of a game with two spiral habitrails is Chicago Vending Company’s 1934 ‘Three Point’.

*Info courtesy of IPDB

Care Instructions

REPRODUCTION BACKGLASS CARE and RECOMMENDATIONS

Never “triple thick” or apply any additional coatings to the backside of the glass.
Alcohol, acetone, and most ‘rattle-can’ liquids must NEVER contact with the ink.
If laying a glass down on its backside, always put down a towel or fabric to lay on.
The glass stock is tempered – so avoid significant hot-cold temperature shifts.
Be cautious of any impacts to the edges, such as setting the glass down on a concrete floor.
Never allow ‘sitting’ moisture on the backside. After 5-7 minutes there is a risk of ink degradation.
Do not spray cleaner directly onto the backside as prolonged contact with liquids may damage your glass.
If you must clean the backside (bulb dirt, etc.) wipe with a pre-dampened cloth (water or Windex).
After wiping, make sure the liquid is dried off (wipe all the way to dry). Do not allow any moisture to sit.
Glass cleaner sprayed directly on the fronts is fine.
Don’t let cleaner sit between the channels and your glass.

Star Trek Next Generation Custom Mirrored Backglass

Care Instructions

US Tarriff Info

You may also like…

Star Trek Next Generation Custom Mirrored Backglass

Care Instructions

US Tarriff Info

You may also like…

Login

Register