viking

Viking Standard Backglass

$289.00 USD – $315.00 USD

This is our standard version of the Viking backglass, aimed at purists who prefer the original NON-mirrored design.  If you want original, order this version.  If you are up for some added silver glitz, we also offer our custom mirrored version of the Viking glass.  Go back and see the listing in the Backglass section of the Store.

Reproduction backglass produced on genuine tempered glass. Polished corners and edges.

Includes a custom made CPR-matched-thickness stainless steel liftbar & trim kit, by default – OR you may pick from a selection of powder-coated liftbar color choices.

NOTE:  The overall color scheme you see in the main thumbnail IS what you get on this reproduction glass.  A ton of effort was made to source the best possible original artwork sample that preserved the ACTUAL ORIGINAL “belly of a wooden ship” color scheme of the original painting and Bally glass… which is a darker brown-based scene… NOT a lightened yellow/orange-based scene.   We did not repro this backglass based on the look of the 40 year old aged/lightened/washed look that most people have in their games today.  This reproduction is based on an NOS glass that had been stored for 40 years with zero exposure.  Take a look at the gallery pictures – showing a lab roof print. (left) of the final CPR master artwork (what is printed to the reproduction)… compared to the 40 year old NOS original (right).  Plus two outdoor pictures (front-lit and back-lit).  This reproduction glass backlights GORGEOUSLY and restores all the range and colors that you unknowingly had lost – with all the dynamic range, black levels, and restored tones that have suffered tremendously on many VIKING backglasses today… many people are used to a washed-out yellow/orange figment of what the original glass looked like 40 years ago.

SKU: GLAS-VIKING-STANDARD Category:

REPRODUCTION BACKGLASS CARE and RECOMMENDATIONS

  • Never “triple thick” or apply any additional coatings to the backside of the glass.
  • Alcohol, acetone, and most ‘rattle-can’ liquids must NEVER contact with the ink.
  • If laying a glass down on its backside, always put down a towel or fabric to lay on.
  • The glass stock is tempered – so avoid significant hot-cold temperature shifts.
  • Be cautious of any impacts to the edges, such as setting the glass down on a concrete floor.
  • Never allow ‘sitting’ moisture on the backside.  After 5-7 minutes there is a risk of ink degradation.
  • Do not spray cleaner directly onto the backside as prolonged contact with liquids may damage your glass.
  • If you must clean the backside (bulb dirt, etc.) wipe with a pre-dampened cloth (water or Windex).
  • After wiping, make sure the liquid is dried off (wipe all the way to dry).  Do not allow any moisture to sit.
  • Glass cleaner sprayed directly on the fronts is fine.
  • Don’t let cleaner sit between the channels and your glass.