glas-skate02
glas-skate03
glas-skate04
glas-skate05
glas-skate06
glas-skate07
glas-skate08
glas-skate09
glas-skate10
glas-skate11
glas-skate12
glas-skate13
glas-skate14
glas-skate15
glas-skatephotos

Skateball Backglass

$269.00 USD

Genuine tempered glass (not a translite).  CMYK & spot ink-silkscreened, and mirrored. Beyond a replacement, perfect as a wall hanging in your gameroom, this glass is relevant all on its own. Polished corners and edges, ready for new trim and lift bar.  Gorgeous replacement, finally get rid of that old chipped, crackled, or shedding original backglass.

SKU: GLAS-SKATEBALL Category:

REPRODUCTION BACKGLASS CARE and RECOMMENDATIONS

  • Never “triple thick” or apply any additional coatings to the backside of the glass.
  • Alcohol, acetone, and most ‘rattle-can’ liquids must NEVER contact with the ink.
  • If laying a glass down on its backside, always put down a towel or fabric to lay on.
  • The glass stock is tempered – so avoid significant hot-cold temperature shifts.
  • Be cautious of any impacts to the edges, such as setting the glass down on a concrete floor.
  • Never allow ‘sitting’ moisture on the backside.  After 5-7 minutes there is a risk of ink degradation.
  • Do not spray cleaner directly onto the backside as prolonged contact with liquids may damage your glass.
  • If you must clean the backside (bulb dirt, etc.) wipe with a pre-dampened cloth (water or Windex).
  • After wiping, make sure the liquid is dried off (wipe all the way to dry).  Do not allow any moisture to sit.
  • Glass cleaner sprayed directly on the fronts is fine.
  • Don’t let cleaner sit between the channels and your glass.